02-01-2015, 07:13 AM
The engine is a Cummins V903. The engine and the generator look, sound and run great. My main problem is the rust damage. I sent photos of the underside to the people at the Newell factory. One of the Jims (Jim Gering) said it was the worst rust damage he’s ever seen and I think he’s been with Newell for a long time. He seemed to think the rust was from being in a bad environment for a long time but I still suspect the wet bay. The plywood under the holding tanks have a lot of rot. The majority of the rust damage is under and around the wet bay. Someone replaced some of the plumbing in the wet bay at some time. I think there was a leak somewhere in the wet bay and the foam underneath held it to the frame and rusted away. The only leak I found in the wet bay was at the flange where the toilet empties into the black tank and I fixed that. I know from this forum that the holding tanks have a tendency to develop leaks but I can see no evidence of any other active leaks. Maybe a combination of a bad environment and a wet bay leak?
Anyway, I included some photos (one showing some of the worst rust damage). I appreciate any advice.
To HoosierDaddy: I grew up in Ft. Wayne.
Anyway, I included some photos (one showing some of the worst rust damage). I appreciate any advice.
To HoosierDaddy: I grew up in Ft. Wayne.