01-15-2013, 06:09 AM
Tom:
The Volvo fan motor wouldn't work, it was the same diameter but the shafts were too short.
The front fan on mine blows along the curb side wall behind the passenger seat. Under the counter is a separate heat exchanger and fan. The plenum box is shaped different than the front plenum. The fan may be a pancake design.
Thanks,
The Volvo fan motor wouldn't work, it was the same diameter but the shafts were too short.
The front fan on mine blows along the curb side wall behind the passenger seat. Under the counter is a separate heat exchanger and fan. The plenum box is shaped different than the front plenum. The fan may be a pancake design.
Thanks,
Steve Magown
Calhoun, LA
2001 Prevost H3 Vantare
formerly Newell #458