You are not logged in or registered. Please login or register to use the full functionality of this board...

Rear camera blank
#1
While waxing the coach a couple weeks ago, I decided  to clean up the clear plastic cover on the camera and flex seal it.  I also sealed around the camera as it was open on the edges and the camera was flexing in the opening.  I have since had 2 blown 5 amp fuses.  Is this merely a coincidence or is this going to involve some serious trouble shooting?  Any ideas on what direction I should take?  Thanks guys!
Tony Van Helden
2003 Newell #646 2 slide
Tow 2017 Grand Cherokee Trail Hawk
Citroen Charleston  2cv
Spencer, Iowa (summers)
Mesa, Az. (winters)
Reply
#2
I had a rear camera issue that I created. I resealed the housing, and trapped existing moisture in the housing. But as Richard says, look for the simple first, IE loose connections, loose fuse terminations etc. Also does the fuse protect more than just the camera? 


BTW, congrats on keeping a 2cv on the road !

Guy
Guy & Sue
1984 Classic 40' #59
Reply
#3
The board only shows the camera on that fuse.  Did you unseal it and solve your problem?  That's very interesting!
Tony Van Helden
2003 Newell #646 2 slide
Tow 2017 Grand Cherokee Trail Hawk
Citroen Charleston  2cv
Spencer, Iowa (summers)
Mesa, Az. (winters)
Reply
#4
Several weeks open in summer time and all was well. Been working for 18 months since.
Guy & Sue
1984 Classic 40' #59
Reply
#5
In other words, keep the plexiglass sealed, but open the space around the camera, right?

We just got to Mesa,Az. today, charged the battery  on the 2cv and took a spin!  Fun!
Tony Van Helden
2003 Newell #646 2 slide
Tow 2017 Grand Cherokee Trail Hawk
Citroen Charleston  2cv
Spencer, Iowa (summers)
Mesa, Az. (winters)
Reply
#6
Correct ! Big Grin
Guy & Sue
1984 Classic 40' #59
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)