Attached you'll see an odd hose and ball valve with a T to a water hose fitting in my aquahot bay. It's odd because the ball valve only close one side of the T and the plastic plug the other side of it. Of course, it's leaking.
I have NO idea what it's there for. Can anyone enlighten me?
Thanks!
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan
I can't really tell where the hose goes, but my guess, and it's really only a guess, is that it might be a re-configured black/grey tank flush connection. My tank has a garden hose connection which allows you to flush out the tank, but it's mounted much closer to the tank itself, and not real easy to get to. Is it possible a PO added a length of hose to aid access? Are you able to trace the hose to the black/Grey tank?
David and MaryLynn Kammeraad
1996 Newell #427
2014 Buick Lacrosse
The T fitting attaches to a hose which goes to the base of the waste water tank.
Maybe a flush as there is a garden hose connection, but the T fitting with valve on one side has me stumped as there is no way to shutoff the pressure to the garden hose end... It drips smelly water all the time.
Well not at the moment cause its empty!
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan
It is for the waste tank flush. In it’s original config there is a tee in that line because there is also a flush fitting at the top of the tank. The tee allows you to flush from the top or the bottom. What you have is a modification by a previous owner.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home )
)