Posts: 636
Threads: 100
Joined: Jan 2021
Hey All!
Can someone tell met exactly what size the pocket door 90 degree fittings to the cylinder are.. Looks like 1/8" OD tube, but what brass thread into the solenoid body?
And is there anyplace that would have them on a Sunday? I'm leaving for a Thanksgiving trip on Monday morning!
Thanks!!!
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan
Posts: 736
Threads: 98
Joined: Nov 2018
Take a look at you passenger side air dump valve to see if they are the same. As a work around, if they are the same size, deactivate the passenger valve and use one of them till you can get another.
Steve & Doris Denton
45' Newell #525, Bath & Half....sold
37' Country Coach, Tribute....Cat C9, 400 hp
2014 Honda CRV Toad
Summerfield, FL
Posts: 636
Threads: 100
Joined: Jan 2021
They are not the same, my dump valve ones are 1/4 OD tube....
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan
Posts: 5,853
Threads: 500
Joined: Jul 2012
I just replaced one. It is metric. M10-1 thread and is unobtainium. I bought a m10 to 1/8 npt adapter and put a 1/8 90 with a 1/8 npt to 1/8 tubing push to connect
Tom
2014 Haulmark 40' Super C on Freightliner Cascadia ISX15 Easton 13 speed
Former Owner 1990 38' Newell Coach 236 8V92
Former Owner 1999 45'8" Newell Coach 526 Series 60
Former Owner 2002 45'8" Newell Coach 608 Series 60
(This post was last modified: 01-02-2026, 06:47 AM by
encantotom.)
Posts: 636
Threads: 100
Joined: Jan 2021
Looks Like the m10-1 is the same as
Equivalent Inch Thread 3/8 - 24 UNF
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan
