[rvguy]

To remove the valence.

Pull slide in. Use your hands and feel for one cross bolt at each end, about 18 inches from the end. You only have to loosen it. You will need a 7/16 or 3/8 wrench on both bolt head and nut. Else it will just spin.

Push straight up, perhaps with some enthusiasm. It’s heavy and awkward for one person to handle.


Suggest you use the search engine and find Latitude28 repair thread.

To remove the upholstered curve, first remove the “sweeper” brushes to access the screws holding the upholstered trim. You will see the other two hex head bolts holding the block with the slide pin.

Thank you as always. I did see the post on Latitude28 for the repair. will tackle this this afternoon.