10-28-2022, 02:14 PM
Seal is installed and slide is reinserted. Still much work to be done but the seal was easy peasy but the glue dripping down my neck while installing overhead was was not that much fun. Total time about 1.5 hours including installing the rivnut and cutting the new seal, (that really made my stomach queasy) gluing and folding over the rubber on the new seal and smashing with the SS plate. The seal was about 6 inch to long.
Richard the main problem with the slide is those dam shim blocks that on my coach screwed to the frame, I will lift the salon in the morning chisel them out and reinstall with additional shims to adjust the top to match up with the locking pins, this coach was way out of whack with the 2 rams not lining the bottom correctly and those shims. I will have to adjust the closed and open fully limit switch also.
Richard the main problem with the slide is those dam shim blocks that on my coach screwed to the frame, I will lift the salon in the morning chisel them out and reinstall with additional shims to adjust the top to match up with the locking pins, this coach was way out of whack with the 2 rams not lining the bottom correctly and those shims. I will have to adjust the closed and open fully limit switch also.
1999 45' with tag axle, #504 "Magnolia"
Gravette, Arkansas