You are not logged in or registered. Please login or register to use the full functionality of this board...


Re power project
#1

The original 903 Cummins and 5 speed Allison are being replaced with an 8.3 inline 6 Cummins and a 6 speed Allison.

There has been some progress.

The engine and trans are out of the donor rv and out of my coach.
The rear end will get a gear change and the air bags replaced before the new power goes in.
I should have a couple of pictures to post soon.


Scott

1983 38' Classic #007
8.3 Cummins, Allison 6 spd.
"Any other Way"
Reply
#2

Sounds like Mike is a busy man, making good progress. Look forward to some pics!

Love old schoolHeart
1976 Newell 8.3 cummins allison 6spd
1977 Newell 8.3 cummins allison 6spd
Reply
#3

I attached a few photos of the donor engine and trans and the hole it's going into.

The new power looks tiny compared to the boat anchor that came out.


Scott


Attached Files Thumbnail(s)
           

1983 38' Classic #007
8.3 Cummins, Allison 6 spd.
"Any other Way"
Reply
#4

Awsome!! Is he going to do any pre-install clean-up and painting? With mine he changed all the belts and hoses, new alternator, oils and filters etc. Sure alot easier to do all of it now. Another thing i wish he would have done to mine was new engine bay insulation.

Love old schoolHeart
1976 Newell 8.3 cummins allison 6spd
1977 Newell 8.3 cummins allison 6spd
Reply
#5

The oil, filters, belts, etc will get done.
Mike is going to insulate the engine bay, it never seemed overly loud or hot but nearly all of the original insulation is gone.
Thinking about upgrading to the tilt/telescoping steering column and wheel as well.
I'm just trying to keep track of all the costs of the nice to have extras to make sure I don't get carried away...

Scott

1983 38' Classic #007
8.3 Cummins, Allison 6 spd.
"Any other Way"
Reply
#6

On my '73 I replaced the old steering column with one from an Acura. I was able to move a lot of the dash switches to the steering wheel using relays. Headlights, dimmer, window wipers, window washer, cruise control, etc. That was back in the 90's, with today's steering columns you could add radio and phone control also.

Jon & Chris Everton
1986 40' Dog House #86
450 hp ISM 5 spd ZF Ecomat 2
2004 Range Rover L322 Toad
Reply
#7

A little more progress as we wait for air bags and gears to come in.

Engine bay insulated and intercooler, radiator, and fans mounted.


Scott


Attached Files Thumbnail(s)
       

1983 38' Classic #007
8.3 Cummins, Allison 6 spd.
"Any other Way"
Reply
#8

Looking good Scott, you will have a great coach when its all said and done. The build quality of a Newell and a power train thats reliable and very efficient. Best of both worlds!!

Love old schoolHeart
1976 Newell 8.3 cummins allison 6spd
1977 Newell 8.3 cummins allison 6spd
Reply
#9

All the new air bags are in, rear end gears are changed, and the front bearing seals are changed over to oil bath.
Engine and trans will go in next, probably next week, there is another coach coming in that needs to be worked on this week.
Can't wait to see it run.

I sold the old 903 to a tractor puller in PA, he uses just the block and builds it up to run on alcohol, it will make 5,000 hp!


Scott

1983 38' Classic #007
8.3 Cummins, Allison 6 spd.
"Any other Way"
Reply
#10

5000 hp would really push the newell up the hills....

tom

2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)