Posts: 636
Threads: 100
Joined: Jan 2021
Hey All!
Can someone tell met exactly what size the pocket door 90 degree fittings to the cylinder are.. Looks like 1/8" OD tube, but what brass thread into the solenoid body?
And is there anyplace that would have them on a Sunday? I'm leaving for a Thanksgiving trip on Monday morning!
Thanks!!!
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan
Posts: 735
Threads: 98
Joined: Nov 2018
Take a look at you passenger side air dump valve to see if they are the same. As a work around, if they are the same size, deactivate the passenger valve and use one of them till you can get another.
Steve & Doris Denton
45' Newell #525, Bath & Half....sold
37' Country Coach, Tribute....Cat C9, 400 hp
2014 Honda CRV Toad
Summerfield, FL
Posts: 636
Threads: 100
Joined: Jan 2021
They are not the same, my dump valve ones are 1/4 OD tube....
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan
Posts: 5,844
Threads: 500
Joined: Jul 2012
I just replaced one. It is metric. M10-1 thread and is unobtainium. I bought a m10 to 1/8 npt adapter and put a 1/8 90 with a 1/8 npt to 1/8 tubing push to connect
Tom
Former Owner 2002 45'8" Newell Coach 608 Series 60 DDEC4/Allison World 6 Speed HD4000MH
(This post was last modified: 01-02-2026, 06:47 AM by
encantotom.)
Posts: 636
Threads: 100
Joined: Jan 2021
Looks Like the m10-1 is the same as
Equivalent Inch Thread 3/8 - 24 UNF
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan
