You are not logged in or registered. Please login or register to use the full functionality of this board...


Sensor?
#1

[attachment=3102 [attachment=3101] I need to replace this part that my service center found was dripping oil while performing routine service last fall. I believe it is a sensor that was on the drivers side of the series 60. Any help will be appreciated.


Attached Files Thumbnail(s)
       

94 Newell #365, 2009 Smart, 2005 500SL, 2012 ML350, 1934 Ford Streetrod Golf Cart, 1958 Century Coronado, 1965 Cruisers Inc. Car and Boat CrazyTongue
Reply
#2

Cant say fer sure..Looks like an oil pressure sensor

1993 Newell (316) 45' 8V92,towing an Imperial open trailer or RnR custom built enclosed trailer. FMCA#232958 '67 Airstream Overlander 27' '67GTO,'76TransAm,'52Chevy panel, 2000 Corvette "Lingenfelter"modified, '23 Grand Cherokee.
Reply
#3

That's what I suspected also. I guess it would be available from a Detroit dealer or is this added by newell?

94 Newell #365, 2009 Smart, 2005 500SL, 2012 ML350, 1934 Ford Streetrod Golf Cart, 1958 Century Coronado, 1965 Cruisers Inc. Car and Boat CrazyTongue
Reply
#4

I got one from napa. Important thing to know is thread size and pitch, plus full range on the oil pressure gauge

Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home Cool )
Reply
#5

There should be a number on it somewhere. I'd take it to Stoops or to Clarke Service in Fort Wayne.

1993 Newell (316) 45' 8V92,towing an Imperial open trailer or RnR custom built enclosed trailer. FMCA#232958 '67 Airstream Overlander 27' '67GTO,'76TransAm,'52Chevy panel, 2000 Corvette "Lingenfelter"modified, '23 Grand Cherokee.
Reply
#6

There are several on eBay but you still need too find a number to make sure..
http://www.ebay.com/itm/Detroit-Diesel-O...1502348442

Jimmy
Reply
#7

Larry: when I inquired at the Local Detroit Diesel dealer about a temperature sensor for my 8V92 in my 93 coach they stated that it was installed by the coach builder if it was for the dash gauges. If your sensor is for your gauges then Richard's perspective is all you need.

Jon Kabbe
1993 coach 337 with Civic towed
Reply
#8

Thanks for the answers. I can't find any numbers on it so I'll take it to napa to see if they can help. Stoops took it off and they didn't even know what it was. I'll also check with Chuck in Newell parts.

94 Newell #365, 2009 Smart, 2005 500SL, 2012 ML350, 1934 Ford Streetrod Golf Cart, 1958 Century Coronado, 1965 Cruisers Inc. Car and Boat CrazyTongue
Reply
#9

Larry, I looks like a sensor made by NASON which I use on gensets.  I t is for oil pressure and by the terminal arrangement on top I'm guessing is is a switch rather than a sensor ( such as oil pressure which would be a pressure driven variable resistance).  It could be used in a number of applications and the switch's pressure setting determines when the contacts change position.  Most of the switches used on gensets operate at 12psi falling, although  that varies.  The three terminals indicate a "form C" switch which is a common- normally closed- normally open configuration.  I use Davidson sales for the NASON product.  email me if you want their phone number. 

Gordon Jones
2000-45'-2slide-#567
Reply
#10

Guys I maybe wrong but I had an oil pressure sensor go out on 507 but it was on the passenger side not the driver side forward part of the engine...did they have them in multiple locations.

Marc Newman
Formerly Newell 422, 507, 512 701


Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)