06-16-2022, 12:08 PM
Resurrecting and older thread.
It appears that Each AC unit uses 16AMP 120VAC for power (double that for a double unit i.e. 32AMP)
The AH uses one 220VAC 4600Watt element draws 30 Amps and 1 120VAC that draws 14 Amps
My 120VAC is dead, and the 220V element works fine for heat/hot water.
I'd like to bypass the interlock ONLY. I can easily manage my power use so I don't blow breakers nor melt wires, but not sure how to do that for only the 220v element.
Possible?
At some point I will re-drain the system and get the frozen 120v element out.. but not anytime soon!
Thanks!
It appears that Each AC unit uses 16AMP 120VAC for power (double that for a double unit i.e. 32AMP)
The AH uses one 220VAC 4600Watt element draws 30 Amps and 1 120VAC that draws 14 Amps
My 120VAC is dead, and the 220V element works fine for heat/hot water.
I'd like to bypass the interlock ONLY. I can easily manage my power use so I don't blow breakers nor melt wires, but not sure how to do that for only the 220v element.
Possible?
At some point I will re-drain the system and get the frozen 120v element out.. but not anytime soon!
Thanks!
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan