You are not logged in or registered. Please login or register to use the full functionality of this board...

Special Aquahot for Newell ? Can this be right ?
#11
i have a machined impact socket to take the elements out with an impact. rudy taught me the trick.

i am willing to let anyone use it for the cost of mailing.

tom
2002 45'8" Newell Coach 608  Series 60 DDEC4/Allison World 6 Speed HD4000MH

#12
I am sure the electrical engineers will straighten me out.

So with both AC units on high, that’s about 35 amps on each leg.

My AH draws about 20 amps on EACH leg since it runs on 220.

So if the interlock is eliminated, one could draw up to 55 amps on each leg at the power pedestal.

The interlock is located in a grey metal box just below the breaker box in the rear closet.
Richard and Rhonda Entrekin
99 Newell, 512
Subaru Outback Toad
Inverness, FL (when we're home Cool )
#13
As a data point my Foretravel had the same size aqua hot but with only 1 120vac 1650 watt element so I could keep it on with the 2 AC's running. That single 120vac element gave me hot water all day, not quite continuous long steaming hot showers but ok if we'd wait about 20 minutes between showers.
So if you can do the 120/220 split you can still take comfortable showers using just the 120vac element.
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486 

1993 Newell 39' #337 


Forum Jump:


Users browsing this thread: 1 Guest(s)