08-25-2016, 08:59 PM
Hello, All.
Previous owner said that his step would occasionally not deploy if the battery voltage was 15VDC when it went up last. It effectively overdrove the step into the retracted position. Well, it happened to me and I cannot figure out how to get it to deploy on my 1996 (#416).
I tried having the GenSet off and the ignition in the ON position and then opening the door. If I push the door jamb limit switches in I can here some clicking going on underneath the coach and the step light is on.
Any ideas on how to deploy it? I suppose I am lucky that it is not the other way around, not being able to retract it!
Thanks & Best Regards,
Bill & Jimmy
Previous owner said that his step would occasionally not deploy if the battery voltage was 15VDC when it went up last. It effectively overdrove the step into the retracted position. Well, it happened to me and I cannot figure out how to get it to deploy on my 1996 (#416).
I tried having the GenSet off and the ignition in the ON position and then opening the door. If I push the door jamb limit switches in I can here some clicking going on underneath the coach and the step light is on.
Any ideas on how to deploy it? I suppose I am lucky that it is not the other way around, not being able to retract it!
Thanks & Best Regards,
Bill & Jimmy
Best Regards,
Bill Sallai & Jimmy Tyson (Dog)
1996 Newell Coach FMCA Show #416, 45’ x 102”
DD Series 60 DDEC3
Allison HD4060 6-Speed World Transmission
Ham 2m/70cm KJ6VBQ
Horsham, PA